Learn more about BladeRoom Modular Data Center Systems:
A range of rack densities, from 1kW per rack to beyond 24kW per rack, can be delivered in a BladeRoom data center, enabling the provision of low, medium or high densities – or a combination of all three within the same facility. The patent pending BladeRoom cooling system allows any rack to be made low, medium or high density without additional cooling equipment or special provisions required.
A rack can start at a very low density and be filled over time to beyond 24kW per rack without any loss of efficiency, offering real future proofing and flexibility as technology moves towards higher density IT setups.
BladeRoom data centers can be scaled up or down in size to closely match business demand and offer the required number of racks and IT capacity, allowing any facility to change from a low to medium to high density throughout its operational life.
The BladeRoom system has been rigorously tested and proven to achieve densities over 24kW per rack using 100% free air cooling, something that has not previously been achieved. As there is enormous diversity in peak loads of the individual servers, the dynamic entrainment of ambient air is sufficient to cool the servers in all but the most extreme external conditions. In such conditions, the standby cooling system will be used when called for by the BMS, albeit rarely (less than 1% of the annual operating cycle in temperate climates).
To learn more about PTS Data Center Solutions available to support your Data Center Infrastructure Management and Monitoring needs, contact us or visit:
- Data Center Power & Cooling Systems Analysis
- Data Center Commissioning
- Network Operating Center (NOC) Design Services
- Data Center Design – KVM & Serial / Remote Access Systems Design
- Data Center Monitoring & Control
- Data Center Maintenance (DCMMS)
- Managed Services – Outsourced IT & Facility Solutions